Description
Hypo Enforcer is added to sodium hypochlorite to lift its cleaning power, improving wetting so the chlorine solution penetrates deeper into porous surfaces such as natural stone, ceramic, porcelain and concrete. Actichem describes it as unlocking the full potential of the chlorine for mould remediation.
It’s used at a fixed ratio with pool grade chlorine, giving faster stain removal and antimicrobial disinfection where mould and organic buildup have taken hold.
Features and benefits
- High performance additive for sodium hypochlorite (pool chlorine)
- Improves wetting and penetration into porous surfaces
- Boosts mould remediation performance
- Rapid stain removal
- Antimicrobial disinfection
- Suits natural stone, ceramic, porcelain and concrete
Directions for use
- Mix 1 litre of Hypo Enforcer with 15 litres of 12.5% sodium hypochlorite (pool chlorine), mixing thoroughly before use
- Pre-test on an inconspicuous area first
- Remove debris from the affected surface, then apply the mixed solution by spray, mop or cloth, agitating heavy organic buildup
- Allow a minimum 1 minute dwell time for disinfection, or 10 minutes for mould remediation
- Rinse thoroughly with clean water, repeating for heavily contaminated areas
