Description
This is a clear, inorganic based, high performance seal for natural stones, terrazzo (both epoxy and cement based) and concrete. It leaves a non-yellowing finish while protecting the surface from stains, abrasion and scratches, and keeps an attractive, safe coefficient of friction underfoot.
It’s ready to use straight from the container, dries in around 10 minutes and is designed to never need stripping, which cuts down on labour and machine downtime.
Features and benefits
- Clear, inorganic based micron thin film treatment
- Suits natural stone, epoxy and cement based terrazzo, and concrete
- 10 minute drying time
- PFAS free formulation
- Ready to use, no dilution required
- Non-yellowing, protects against stains, abrasion and scratches
- 23% volume solids
- Never needs stripping
Directions for use
- Lightly shake the container before use, no mixing required
- Lightly spray onto a looped microfibre pad to moisten, then apply a fine mist to the floor and spread evenly across sections of about 1.62 square metres (180cm x 90cm), repeating as you go
- On porous surfaces honed at 400 grit or lower, use Micron Primer beforehand
- Keep the floor dry for 24 hours after application
- Avoid over-application, do not overwork the product, for interior use only, keep away from gloss, fabric, metal or painted surfaces
